top of page
Paint Swatches

TORINO NORMAL

Breathable water-based paint

CODE TN100

DESCRIPTION AND USAGE

Breathable water-based paint for the protection and decoration of all interior walls. Particularly recommended for interiors where there may be traces of damp, where high breathability is desired and where the previously applied paint doesn’t provide sufficient guarantees of adhesion.

Dry film appearance: matt.

normal-01-01-01.png

APPLICATION CYCLES​

New walls

The surface must be in good condition, dry, clean and free of traces of mould.

Apply a coat of suitably diluted TORINO primer. After a minimum of four hours apply two coats of TORINO NORMAL.

Already painted walls

The surface must be in good condition, clean and free of traces of mould.

Remove any tempera and chalky, flaking old paint by sanding or brushing. Apply filler if required and, where necessary, a coat of suitably TORINO Primer by brush. After a minimum of four hours apply two coats of TORINO Normal. 

IMPORTANT

  • Do not apply on fresh or very alkaline plaster; allow to dry, harden and cure for at least 3-4 weeks

  • Do not allow to freeze

  • Store in a cool dry place away from direct sunlight

  • Apply at temperatures between 5 and 35°C

  • Wash tools thoroughly with water after use

  • Coverage depends on substrate absorption

normal-01-01-01-01-01.png
bottom of page